Description:

In the event of repair, the spot weld breaker is used to mill off the resistance spot weld connections made by the manufacturer in order to remove damaged panels from the vehicle.

• Pin-point milling minimizes material fatigue and damage to the paintwork.
• The centering pin on the milling tool and the counter-hold facilitate working on edges, profile sections and seams/folds.
• The counter-hold can be removed if required (e.g. in difficult to reach areas).
• The milling depth can be adjusted with infinite variability.
• The product has been technically revised. The previous product V.A.G 1731A can still be used.

Change: Different items supplied. Change from triple-cutting to quadruple-cutting miller. Cutting oil is no longer included in items supplied and must be ordered separately.

Features:

Pneumatic spot weld breaker with air flow valve for individual speed control.

Technical data:

• Operating pressure: 6-8 bar
• Speed: 900 rpm.
• Air consumption: 71 rpm.
• Acceleration: 1.07 m/s2 - DIN EN 28662, DIN ISO 8662
• Noise level: 70 dB (A) - DIN 45635, DIN 45635 Part 20/09.90
• Hose internal diameter: > 6 mm

Includes:

• Included in transport case
• Spot weld breaker with counter-hold and high quality milling bit ø 8 mm
• Air flow reduction valve
• Hexagon key
• 5 replacement milling bits VAPO

Recommended accessories:

• Extension - VAS 882 001/1; ASE 882 002 00 A00
• Set of milling bits - VAS 882 001/2; ASE 882 002 80 B00
• Cutting oil - VAS 882 001/5; ASE 882 002 70 E00

Warranty:

24 months

Manufacturer:

Wieländer & Schill KG

Supplied by:

Snap-on Business Solutions 1-800-892-9650